FortecStar 31", uni lnb, FS
Classic NA (blind search), its the traditional "stationary" mount that is found on most dishes, it just has a elevation adjustment. the motor is a Digipower SG 2100 DiSEqC 1.2 H-H motor.
I calculated the setting and my motor elevation for my area is 32.5 .
and after that I just adjusted the elevation on the dish. I was useing 119 for reference to set the proper elevation, not knowing that it was circular.
I tried getting even a faint signal first, then making the dish move just a digree with the receiver, and when getting the highest signal then adjusting the elevation on the dish. then adjusting the TP frequency to aquire the highest signal. but I tried this all on 119, thanks for telling me that was not a FTA sat. I'll try to find G 3C and then go from there. oh and I finally found a
installer that would some out, flat fee (nice) but they could not do it because the guy had no experiance in
motorized systems.
But he was honest enough to not charge me for it.
He said he'd call a more experianced co-worker to come out and take a look.
Thanks guys- hope all that info helps yall help me.