Quote:
Originally Posted by gremlin411
sorry about that...
It is a 6' offset 70.5" X 76" dish. I was looking at a motex H180 from Sadoun but someone on another site it would not work. It is a fiberglass dish and came with a fixed mount on it. I found it at a construction site and stoped and asked and they said I could have it. With the fixed mount and all it is WILL NOT go over 50 lbs. |
The way you go Gemlin is going to depend on how good you can work with metal. because you will have to put a offset in a ring from the prime focas dish to offset feed ku an it is going to depend on the offset angle of the glass dish that you got ( about 25 degrees thats about a average for that size dish). an that will need to added to the ring of a prime focaas ring if you go that way. now i got a 1.5 meter channel master offset feed with a old Certified industries Horz to Horz mount an had to do a lot of fab work to get that mount to fit, cutting an welding. but luckey for me i can do it an my cousin is a machinest. so good luck Gremlin.