elgemcdif...
I understand your suggestion very well, however, I actually wanted to install a Chaparral Cornotor II feedhorn on the BUD This is the LNB with a
C-band and Ku LNB attached to the BUD. I will run a cable from the C-band LNB to a Splitter, and a cable from the Ku-band LNB to another splitter. From each splitter (C-band and Ku), I run a cable to the the DSR922, and from each splitter, I run a cable to a
DiSEqC switch, and from the switch a cable to the DVB receiver. With this setup, I can get all my scrambled channels on the DSR922, and all the FTA channels on the DVB-MPEG-2 receiver. I think this will work..
Would this be correct?