After not being able to receive new frequencies on my Merc II when I did a blind scan, I decided to just trash all of my saved data and start over....
I performed a factory reset and rescanned in all of the satellites that I enjoy receiving programming from, (Galaxy 10,
Hisp@30, Galaxy 25, AMC 3, etc.).
It was a timely process that took a half of a day (walking away and coming back) but it solved all of my weirdness problems, until...
I scanned in Galaxy 25. Like it was reported above, the offending Freq is 12152/H !
I deleted Frequency 12152/H and haven't had a bit of a problem in over 12 hours. (I deleted it last evening).
If I do a factory reset again and re-scan in all of my favorite satellites, next time I will write down all of the ones that I want to re-save. That may make it a little easier to put everything back where it was.
I am having a problem retrieving a certain channel on Gal 11 that I had entered in manually, but I am going to keep trying on that one, because I may not have entered it in correctly (4 or 5 times).
In summary, Factory Reset, GOOD! Re-Scan everything to restore to original condition! The
Mercury II responds to the remote and does what it is supposed to do now.
Thanks!!
Bill