|
Hi Northman: I do quite a few of StarChoice dishes even though i am down in S Fl. an pictures would help alot, an i am not a exspert on Star Choice but will try to help you. now if its a real old StarChoice it will be a stamped steal dish about 24inches which is not going to work well as a FTA dish (to small) but you can un bolt the mount from the reflector an then the lnb arm (from the mount) an turn it up side down an remount lnb arm back to the mount then bolt it back on the dish an that will work for the stamped steel dishes, just did a change out last week from one like that to a composit with 2-lnbs, that the canadian brought down here. but if you have a composit dish its even easer, cause the mount that has the skew on it will turn up side down, just by lousing the 4-bolts that hold it to the reflector, then re tighten em an you are good to go, but the composit dishes are made by channel master an take a larger pole 2 3/8 od than the stamped steel dish that i changed out. so hope all helps Northman an good luck. Captain
|