|
How to make it work.
You must first mount your motor to the pole. Then mount your dish to the motor leaving it loose. Then take your motor to "0" then adjust your dish elevation but first thing is to have your motor adjusted to your latitude!! So if it is 38.1 for your zipcode then your motor elevation is 38. Ok then if you already have a preprogramed recevier connect it and adjuSt the dish with a signal meter until you see perfect signal and quality. I have both of these motors and they work great as for pointing towards the ground its all a matter of adjustment.
__________________
[FONT=Comic Sans MS][SIZE=5]Fortec 36" Dish[/SIZE][/FONT]
[FONT=Comic Sans MS][SIZE=5]FORTEC MERCURY II RECEIVER IT WORKS GREAT!![/SIZE][/FONT]
[FONT=Comic Sans MS][SIZE=5]INVACOM LNB ku 0.3db SNH-031[/SIZE][/FONT]
|