I purchased a V-Box II from
Sadoun back in January and now setting it up. Yesterday I set it up with a Fortec-Star-Mercury-II and a 7.5’ old bud. Put about 7 satellites in from AMC-7 to Galaxy 11. Everything worked just fine with the
Mercury II moving the bud from one satellite to another that was programmed in. Well, to day I thought I’d set the east limit in due to a big evergreen tree blocking some of the full limit on the east side. No sense moving the bud the extra 4 inches to the reed switch. Well, now I have a "Er2" message error and can only move the bud one click at a time. I have checked the wiring, reed switch sensor is not broken and the motor is working. I have done Factory Restore Default (reset) with and with out all the wires. Everything I have done the Er2 error is still there.
I can move the bud with both the V-Box remote and Mercury II remote one click at a time. Programming in the satellites the Mercury II will say moving the dish but it dose not.
The (Restore Factory Default (Reset): This function will clear all data in the positioner, includes High/Low Limits, Satellite Positions, …, ect. (Well, everything but Er2).
Anyone got any suggestions?