Quote:
Originally Posted by jsattv
I am trying to install a Corotor II + FeedHorn and Norsat KU and C LNB's on a 12 Foot Mesh Dish in my back yard. My Receiver is a ViewSat Extreme 2000. I have a V-Box III coming today. I previously installed an Invacom QPH-031 on my Fortec Dish and Stab HH 120 Motor on the roof. For the Corotor II LNB's is the LNB Type in Antenna my Setup for C and KU to be set for Standard (10750)? Would LNB High and LNB Low be set to 5150? And for the Motor settings I used USALS on the Fortec Dish to program and scan in various Satellites and it worked well. Would it be the same for the 12 Footer Actuator/Motor or do I need to look at the other 2 Motor choices of USER & INSTALLER on my Receiver for the Bud Dish? |
The V-box controllers will move your dish OK, but they really aren't suited to control polarity on a Corotor feedhorn. You are better off having an analog receiver control the dish. I don't know if the Viewsat receiver can be set up to switch between Ku and
C-band LO freqs, many or most receivers cannot. You are better off defining separate satellites for C and Ku reception even though it is the same sat. For example I have sats like G10r-C and G10r-K stored, one with 5150 and the other with 10750.
Also, I doubt that the V-box III will do USALS, the other versions didn't. You'll probably have to save sats via DiseqC-1.2 .