|
Thanks. I will just use your number then. So let me outline my newest install procedure.
Set my lat on my motor to 38.269. Aim my dish+motor combo at true south. Then in the software, move it to my most south satellite, which is Echostar 9 at 121W in my case. Peak my signal on this satellite, by adjusting the dish elevation, and bumping the whole motor+dish combo left and right. Check my signal on my most easterly sat, which is Echostar 3 at 61.5W. If the signal is ok(which it should as I am using my newly adjusted lat that you gave me), then everything is ok. If not, I am a bit confused as to what to do in that case.
|