Quote:
Originally Posted by jsattv
Thanks a lot Rainman great info, guess the only thing that I need to know is will that Circular FeedHorn Fit my existing Scalar Ring (which is 6.5 inches inside diameter). My 6.5 inch Scalar Ring attaches to the 4 dish poles and currently clamps over an existing older Chaparal FeedHorn with a Tee-Com LNB attached to it? I had thought that my Scalar Ring would only just fit the Corotor II, so I guess I need to know the diameter of that Circular Feedhorn to get the best of both worlds as you mentioned.
|
the circular feed horn as you are calling it is the scalar ring remove the one on your dish install the new one in the picture above and install the co rotor II into the center. then you will have a nice neat package to receive C,KU, and circular signal.
__________________
Rainman's Equipment
Undien 4600,DSR 922
Fortec Ultra, Satworks 3618
2 Fortec Mercury II
Fortec Classic NA
8.5' Orbitron polar C Ku dish
8.5' Birdview HH C Ku dish
100cm Fortec dish
90cm Fortec dish
2 DG-240 HH motors
Co Rotor II feed horn
Norsat 8515 C band lnb
Norsat 4506A Ku lnb
BSC-621-2 Lnbf
Invacom QPH-031 Lnbf
Invacom SNH-031 Lnbf
Fortec Fsku-v universal Lnbf
V-Box
I Like To Shop at Sadoun Satellite Sales.www.sadoun.com