thank you for your response.
i picked a channel, 2m monde from morocco.
lynsat has this info:
frequency: 11991V
transponder: 15
spid: 705
video pid: 272
audio pid: 273
info from the receiver:
frequency: 11838/V/22031
video pid: 272
audio pid: 273
pcr pid: 272
sid: 705
the transponder frequencies do not match.
obviously i've still have an alignment problem. but what?
is it still an azimuth/elevation issue?
i've gone through the
sadoun site repeatedly. i came across instructions on setting up a stationary dish and it spoke of twisting the lbnf in a particular direction. in the motorized instructions it says there is not need to twist the lbnf because the motor's morion while rotate the whole dish. however, the question that comes to mind is, how does one install the lbnf onto the dish in the first place. i could not find any particular instruction, so, i installed mines with the f-2 connector pointed down or at 6 o'clock. is this correct? i feel this
installation is so close and i'm missing something very simple that it would make one say, "doh!"