|
The switch is a bit fuzzy to me, I hope I have it right. I have the cable coming out of the lnb side of the motor going into the middle port of the switch. The A side(of the switch) goes to the L port on the lnb, the B side goes to the C port.
Regarding the longitude, it is still west.
I have read about resetting the motors, and I wonder if that is it. I also remember reading something about shutting the receiver off before the motor finished moving(I didn't do that) but I still wonder if I did something wrong that caused it to get lost out of sync. If I can't get the usals back, can I still program it in diseqc? I will sure be glad when I can get some results. Thanks, charlie
|