[pmb1010]

so how is it hooked up exactly?
And explain your dish equipment (lnb setup).

Your Pansat only receives DVB signals.
Your DSR922 only receives DCii and Analog signals.

What satellite were you looking at?

Here's an example you can try:
Set your big dish to G0. Make sure you see DCII light on 922 on any digital channel (I dont care if you get picture or not)

Set your DVB receiver to Galaxy 10R C band.
See if you can get the DVB Outdoor Channel
4180 H
tp 24The Outdoor ChannelDVB29270-3/4

You MIGHT have to change channels on the DSR922 to get the polarity right, but eventually you should get some quality indicaton on 4180H
Might have to nudge the dish a bit, as the digitial channels are more fussy than analog channels.

Good luck.