bsc-621 skew

rainman · #1 (**permalink**) 12-17-2006, 05:53 PM

does anybne know how to set the bsc-621 to 0 skew will be installing one on my birdveiw dish with HH mount in near future.

pmb1010 · #2 (**permalink**) 12-17-2006, 07:24 PM

I think there are marks on the cast body, but you can also look down the throat of the device, and put the lnb antennas exactly horizontal and vertical.
The square box thing is about 4'o clock when set this way.

rainman · #3 (**permalink**) 12-18-2006, 04:11 AM

thanks pmb110 appreicate the help.

waynejau · #4 (**permalink**) 01-17-2007, 05:24 AM

Quote:

Originally Posted by rainman

thanks pmb110 appreicate the help.

Hi the information you need is in a pdf at Hook Technology in NZ - on this linkhttp://www.hooktech.co.nz/pdf/helpfile/Hooktech_Cband_LNB_fD_Skew_Settings.pdf

rainman · #5 (**permalink**) 01-17-2007, 06:18 AM

Quote:

Originally Posted by waynejau

Hi the information you need is in a pdf at Hook Technology in NZ - on this linkhttp://www.hooktech.co.nz/pdf/helpfile/Hooktech_Cband_LNB_fD_Skew_Settings.pdf

thanks waynejau will check it out.

rainman · #6 (**permalink**) 01-17-2007, 06:36 AM

just checked out the site and that will do the trick thanks again waynejau.