4DTV Satellite List

datatechnician · #1 (**permalink**) 06-05-2005, 10:21 AM

After replacing my C band Feed horn with a C/Ku feedhorn and changing the configuration on my DSR 920 to c/Ku LNB's I did a master reset and the satellite list was reloaded and I do not have X4 listed (the one I REALLY need) Al other Ku sats are listed but this one. I did a reset again and reloaded the list but still no luck. Is the channel list still sent on G0 ? or do I need to point to a different satelite top get the correct satellite list
Thanks \

/

tdti1 · #2 (**permalink**) 06-05-2005, 08:40 PM

Did you sit on Galaxy-10 transponder-5 for 30 minutes, if not do this, but do a unplug replug first.

datatechnician · #3 (**permalink**) 06-06-2005, 08:27 AM

well the last time I rest I sat on transponder 9. I'll give Transponder 5 a try and see how it goes. I really ned to get X4 Programmed

tdti1 · #4 (**permalink**) 06-06-2005, 01:29 PM

I don't think the maps are on Tr-9 or 7 anymore, you will need to be on Tr-5.

datatechnician · #5 (**permalink**) 06-06-2005, 10:43 PM

well ,still no luck at all getting X4 to show up in the satellite map. I have reset the 920 Three times today (2 Master resets) and still no luck. I don't know if it would be possible to use another sat icon for the X4 satellite or not. All other kU sats show up on the map.
It seems that doing a master reset does not completely erase everything that is needed. :mozilla_frown:

datatechnician · #6 (**permalink**) 06-07-2005, 11:12 AM

No luck at getting X4 yet. I emailed ATS and they told me the only way to get x4 mapped would be to send it to them for a firmware update, as it is outdated. my 920 is at version 61

tdti1 · #7 (**permalink**) 06-07-2005, 12:07 PM

Did you select that you have both c/ku lnb's after the reset?

Ok I see in your first post, that you have done that.