Here are some pictures of the dish parts list and assembly diagrams
Sadoun.net/forums/attachment.php?s=93f2bb9b3e69f16d52f0c51bf4daed74&attachmentid=1366&d=1316385491" border="0" alt="Name: Screen shot 2011-09-18 at 5.34.00 PM.jpg Views: 143 Size: 118.0 KB" class="align_center" />
the only think i had to figure out where things went was that little drawing with the parts list. that was more fun that playing zelda. i think there was a note though to not use the switch on the DMX741 and use a 22k switch that i had left over putting in my k-band dish. i used the prosat Actuator and prosat controller (36v) to move the dish. i do think there were two movable kits to mount but one of them did not have the clips to mount the dish on the base. and i did not use the ground mounting kit i had ordered. i used a 2 1/2 round post that i had here. so far, so good. the dsr200 receiver worked well lineing up the dish on g19. the only thing i have to do now is write the numbers from the prosat controller after i peak my signal. i am using k-band birds because i know what channels on them. haven't had to use the azimuth controller adjustment yet as i have sighted most birds from g19 to horizons2. have to sight those west of here now. lots of fun. can i use a new controller from you for my present prosat actuator? that would be fun if i didn't have to point the dish before veiwing the channels but all in all, i am happy with my 6' dish. charlie
dish geopro 36" 100cm?, sadoun 280 rotor, qph-031, solomend hd pvr-800, geosat pro dsr-200c, dvbworld dvb-s2 usb, 180 cm dish, real old actuator, waiting on g-3000 controller.
i will order it now then. thanks. charlie
dish geopro 36" 100cm?, sadoun 280 rotor, qph-031, solomend hd pvr-800, geosat pro dsr-200c, dvbworld dvb-s2 usb, 180 cm dish, real old actuator, waiting on g-3000 controller.
ordered. charlie
dish geopro 36" 100cm?, sadoun 280 rotor, qph-031, solomend hd pvr-800, geosat pro dsr-200c, dvbworld dvb-s2 usb, 180 cm dish, real old actuator, waiting on g-3000 controller.
Great thanks Charlie
There are currently 1 users browsing this thread. (0 members and 1 guests)