Not slaved, but have 2 individual cables run back.
C-920 was on Doc Scott. Own TV. I think it's V.
Ku-DVB was on nothing (just hooked up) and just pointing at 87w cuz it's all on the same LNBF.
Turning on the DVB receiver I noticed change on
C band signal.
I dont know how it was set.
Can't use DC block. This isn't serial, but parallel connections. The Ku LNBF on this BSC-621 must get power to work.
Update for today:
Seems to be working. I have C band running, I'm watching the ex-Spike TV channel on G0-19, and DVB is on G10R's RTN channels.
When I turn on the DVB box, I get more "sparkles" on the G0-19 channel, but I really dont care as once I get this finished up, it'll be all on one TV and both boxes will not be used at the same time.
As a test, it would be very interesting to put the splitters in, with one leg DC blocked to see if this
BSC621 continues to operate (I suspect it will not).