Quote:
Originally Posted by rainman
If I was going that high PMB I would also brace the pole to the house.  |
it is... current pole is 3" emt 21 feet, with
120cm dish and
HH120 on it.
It's standing on a hardened steel 3 foot pin, and braced to the house with 2 saddle clamps at the 10 foot mark (about halfway).
120cm is mounted at 15 foot mark.
At the very top is some guy wires that anchor the top of pole for added stability in 2 directions.
If I put the new 6 foot dish at this spot, I'll need to rethink things as I lose the top guy wires because H180 motor mounts on top of the pole.