Hi guys,
I finally did it. I took off the east limits on my
SG2100 and ever since then I have nothing but problems with the DiSEqC. The USALS works great with most of the Sats. However, there are a few that I have to tweak and that is when the diSEqC goes ape Sh...t. It doesn't matter how many times I set up a Sat with the DiSEqC it won't remember to go back to that position. What it does is it goes back to O or some were near it.
I have done a master reset, I have changed the cables, I even switched motors and the problem still there. Ok you may think is probably my receiver, Right? Here is the strange thing I also have two units and is doing the same thing on both of them. If it is a software problem I would be totally
.
Why did I removed the East Limits? I wanted to get Telstar 12 @ 15W and Atlantic Bird 1 @ 12.5W.
I would appreciate any inputs from you guys.
Thanks!