[quote=pictureon;35408]
Quote:
|
Originally Posted by elmajed
Hi All,
I have a Samsung Digital Receiver DSB-4700F, and pointing the dish to InteAmerica5. I have most all the Arabic channels including 2M, except the other Moroccan Channel: Almaghribia. I had it before, someone who install it for me enter some frequencies to get it, but now I have done the installation again, but I lost it and seems that I can't get it back.
Can someone tell me exactly what I need to do in order to get that channel back.
Cheers!
Thank you..[/quote=Elmajed]
Press Menu, Go to installation, Enter password, Go to manual scan, scroll down to the second line and press the right arrow until you see NEW. Go down to the third line and enter 11789 using your remote. Go down one more line (SR)and enter 25000. Down to polarity and leave it at Vertical. Press OK. One the receiver done scanning press ok again. Exit the menu and look for the channel. |
Hi, I have the same problem as El majeed. I followed you advise shown below:<<Press Menu, Go to installation, Enter password, Go to manual scan, scroll down to the second line and press the right arrow until you see NEW. Go down to the third line and enter 11789 using your remote. Go down one more line (SR)and enter 25000. Down to polarity and leave it at Vertical. Press OK. One the receiver done scanning press ok again. Exit the menu and look for the channel.>>
The last step One the receiver done scaning , pressOK: The receiver never stops scaning, it just stays fluctuating between 30 and 40% at signal strength. Also, I see motor Status: stop ??
Could you help with this problem?
Thanks
Jay