Wow, guys I can only say thank you so much for all those creative solutions!
This is my current situation. I bought dish and motor in store in Toronto, not over Internet. Before that I spent probably two weeks reading and learning about FTA so I can say that now I'm not so green. I decided to go safe and buy dish and motor in a same store in order to prevent situation where something is not compatible. But...
When I went to store I asked seller are this dish and motor compatible? Answer was "Yes". I also checked their website and there was information, I quote "This 33" dish also comes with U-bolt bracket for motor use". So what can go wrong?
I went home and assembled motor bracket and set angle to 43.6 which is my latitude in Toronto. In motor manual there is a text saying that this is new motor and all new
SG2100 motor arms will be at 40 degree angle (older are 30). So, 40 minus declination is 33 for a dish.
From there everything goes wrong. First I noticed that dish bracket have numbers written upside-down. Also I was missing that U-bolt bracket that I should receive with dish. When I inserted motor arm in dish bracket I couldn't reach more that 20 degrees. I immediately sent email to seller (they don't have phone support for customers???) and answer was that I'm not qualified to install this dish, dish comes without U-bolt bracket, and they will be happy to send me phone # of their
installer.
I thought, OK, maybe they are wright, maybe I really don't know how to install this, so let's do more research. I downloaded absolutely every photo and read every text about motor and dish
installation. All pictures where with different bracket than mine. Then I sent new polite email explaining whole situation and I got email with basically same answer as previous.
Because this dish bracket has numbers upside-down, my only conclusion is that this is made for motors with their arms pointing up, and also, seller doesn't want to bother with his buyers after they leave him the money.
Since all this equipment is brand new I don't want to drill any hole or to make any adaptation to system which could lead to loosing warranty. Shifting dish bracket down didn't help, it's even worse. Also, It's not possible to rotate motor arm for 180 degree.
Sadoun's adapter is very good solution, probably only for situations like this, but I bought this dish new in a store because they said it comes with U-bracket for motor use and I'm not going to accept this as my fault.
I will definitely pack this dish and return it to seller tomorrow and ask him for full refund or different dish model.
One again, thank you all for your fast replies. You really helped me to realize that I'm not so green.
Cheers,
GMan73