After the latest storm, my motor is not working. So this is what I see:
1. I have an
SG2100 about 14 months old, connected to a 90 cm dish with an
Invacom QPH-031.
2. The motor does not show any lights at all, but, when I remove the line to the receiver from the DiSEQc 4x1 switch the green light comes on and I can manually reposition the dish.
3. If I leave everything connected and remove the line from LNB2 I get a flickering orange to red light.
The weather here has been bad so I havent had much time to play with this, but when It first happened, I replaced the switch, thinking that, that was the most likely piece to fry. after that change, it worked for a total of 5 mins.
I am trying to determine, which piece is now bad, lnb, motor or
diseqc switch ... Your help would be really appreciated .. Thanks.
