Quote:
Originally Posted by mickel1138
Forgot to mention,
Yes I have a 22khz switch in these, put even bypassing it doesn't help me. And the only options I have LO freqs, uni and Single S. And that is set to 10750, it switches to 11250 when it's looked at echo sat's. 22khz set to auto,
I'm going to try and change the elevation on the motor and see what happens.
|
I'm a little confused about how you're using the 22khz switch. If you're using it to choose between linear and circular, then it isn't right to put 22khz in as "auto" as you say above. I'm not exactly sure what that would do. I think the auto setting is only used when you're using a universal lnbf, but I might be wrong. If your switch is selecting between linear and circular, you would want to have it set to either on or off, depending on which port you were trying to access, but with auto, I don't know which port you'd be accessing. Same thing if you're using that switch to select some other dish. The receiver doesn't know what you want to do here, so it can't be auto. The only time it can be automatic is switching a universal lnbf which it can figure out by the freq it's trying to hit.
Since you seem to be hitting the Echo sats, I'm guessing that you have the circular port connected to the "off" port of the switch, and you're never selecting the linear port that you'd want to be using for
G25.