I'm on 97.4 and 27.7, and when I calculate the angles to
G25 for a statis setup, it says I need to look at 179.7 (south) and 57.7 elevation.
The DG240 has both elevation and latitude, each on one side. The coronsponding latitude (27) in elevation is 63, now the motor tube has a 35 degree declination. So now we are at 28 and the dish has to compensate the rest. In the book from the DG240 it say 35-declanation which is 4.5, so that's 30.5. So I set the dish at 30.5 inclination.
And 28 offset from the motor, + dish = 58.5, so i'm about 1 degree to high. Makes sense, because when I move it 110 and 119 for reference, I get a peak signal when passing (motor is moving), and then I can never peak it again. So I already figured my elevation is off.
Anyway, thanks for all your tips, I hope I don't have to spend a week on the roof aligning the dish, it's going to be tough finding G25.
Using a Fortec Classing NA, I have set me LO for 10750, and 22khz to auto. It seems to work on the echo sat's, have not yet found a anything lo-band. I looked at several TP's but mostly TP21 @ 12084. Since that's what I would like to see.
I'm going up on the roof again in a few minutes, the TV and receiver at in the window right next to the roof where the dish is, so wish me luck.