08-11-2007, 02:48 PM
|
|
Junior Member
Newbie
|
|
Join Date: Aug 2007
Location: Victoria BC., Canada
Posts: 6
Rep Power: 0
|
|
Hi Mickel, welcome to the forum.
I am very new to FTA, but I started with a motorized FTA. I just installed my motorized ( HH90) satellite using. You have to find True South which means 180 degrees magnetic less declination because you are left of the 90 degrees. In you particular case you should point at 180 - 4 = 176 degrees magnetic becoming your 0 position. (Find your declination for you location, I believe it is 4 or 5)
After you have typed the values on your latitude and longitude on the receiver (assuming you are using USALS), find on your receiver G25 and the motor will move to that position. From here, you adjust the dish East & West; Up & Down until you find the green line or the channel.
Good luck
mill
|