Quote:
Originally Posted by elgemcdlf
I would guess your alignment is off a tiny bit. Not kidding here maybe as little as 1/4 degree. If you receiver is USALS capable I would start by using USALS for movement. This will give a better idea of alignment. If you are currently using USALS how are your readings on the sat in the east that is roughly the same distance from enter as G10 is to the west? With the receiver and TV at the dish gently push up on the dish and note. Now pull down. Now move out to your furthest east sat and repeat. Are your results opposite? In other words did up increase signal in the west and down increase signal in the east? Or the reverse of that. If so move your entie assembly on the mast in the direction of the up increase just a bit. Remember you are very close now so a tiny bit is a tiny bit  If they are the same results work with motor elevation accordingly. Both down lower motor elevation, etc. |
Tried the push pull test with no avail, but right now 11800 is coming in clear but 11720 has no picture, maybe later it will have a picture, that the way it's been going.
But thanks for your suggestion, I really appreciate it.