It helps me with my Espanol
I will start with my system. My primary setup/dish is 4DTV. It is a linear system w/ 8.5' dish. There are channels available on SM5 with the 4DTV receiver. I do not know of an easy/cost effective way to get both circular and linear from one dish. I have a second 8.5' dish pointed only at 40.5 with the
BSC621-2 lnbf installed. While you can use a linear lnb to capture circular transmissions it will not do it very well.
Since 40.5 is really the only sat out there with channels in
Spanish that is circular
c band making it move and all of that is not a required. I have split the 2 lines from the 4DTV dish and run each into a 4 port
DiSEqC switch, in one of the remaining ports I have the line from the dish pointed at 40.5 and the final port is filled with a line from the 90cm dish.
The dish I use for 40.5 I got for free. Paid $49.99 fopr the lnbf when they first came out (before
Sadoun had them) and roughly $40.00 or so in concrete to plant the pole. So for less than $100.00 I was able to add the second big dish. It does have an
actuator on it but I do not have it connected at this time.
I do not know what channels you are trying to receive. Are you looking for anything Espanol or a specific region (Mexico, Columbia, Venezuela, etc.)?