Quote:
Originally Posted by Greysquirrel
This is the problem I had, I was always out 2 degrees, when I sent the dish to 0 it would stop one mark West of zero, I did a reset and I was able to pick up all sats without realigning my dish.
|
Good info. What motor do you have. And I assume you're talking about a hard reset where you move the dish to it's real zero, then push the reset button on the motor, or something like that? Or was it a reset done with software from the receiver?
Either way, good info. I figured that this would work but wasn't positive, and since I had already programmed in all the sats with DiseqC1.2, I didn't want to mess things up, so I never bothered to try.