[rainman]

Ok here we go set the elevation on the dish to 51.5 degrees ( note you may have to go 5 degrees lower on this setting if it is a u bolt mount).
set your azimuth compass heading to 192.7 degrees south you may need to add a few degrees for declinatinon. skew your lnbf counter clockwise when facing the front of the dish in its holder 10.7 degrees. then set your receiver lnb lo freq to 10750 standard. put in active TP freq and sr freq see LyngSat - Lyngemark Satellite for active TP. now slowly move the dish on the pole east or west 1/16 th of a inch at a time to you get a signal lock. would recommend marking the pole and mount so you can see how far you haved moved the dish and you can return to the starting point if needed. also allow 15 seconds between each move for receiver to see the change.if you get no signal on east or west movement drop or raise the dish by1 degree and try east or west movement again continue to do this untill you get a lock then adjust elevation and skew for best quality signal. now this is the settings for G25 aka IA5 which i assume you are trying to get.