|
No you should not have to adjust for preset settings if you are using USALS. If your motor does not land on the correct spot you are not aligned properly. Either on true south or a combination elevation / declination issue.
__________________
8.5' Mesh Dish w/ C & Ku lnb's & 24" actuator
8.5' Mesh Dish w/ BSC621-2 fixed install for circular C Band on 40.5
Fortec Star 90cm Dish w/ FSKUv lnbf & DMSISG2100
Motorola DSR922
Fortec Mercury II
Digital Stream HD1150.
Last edited by elgemcdlf : 07-06-2007 at 09:12 AM.
|