Duh, okay, well I got real good advice on fixing a bent dish, so I thought I would try my luck with this one:
Well, I got this Coolsat 4x1
DiSEqC Switch and it came with my receiver, so I assume it is the correct, recommended switch (I might read my manual a little more).
Anyway, it's working only with LNBs 3 & 4.
Well, that's much better than having only one line, however I now have a third line that I want to connect (and maybe a fourth later on).
You know, it works but I have to remove LNB 3 (or 4) and then connect it in for it to work so I end up just removing/reconnecting, removing/reconnecting, etc. because it absolutely will not work on LNBs 1 or 2.
Okay so to fix this problem, I guess it's just a process of elimination (unless anybody knows any cool ways to fix a DiSEqC switch.)
1. Replace the switch (which is the cheapest thing to replace but it's a pain in the butt because they have to be ordered through the internet).
2. Replace the receiver (taking care to review the requirements for DiSEqC switches) although this is much more expensive.
Okay, I think that's all on this one.
Thanks.
-Delsat