see i have Invacom Single 0.3dB Universal LNBF SNH-031 and viewsat
platinum lite receiver.
The setting is like this:
Intelsat 5 97.0W
On
Universal
lnb high <10750>
lnb low <10750>
tp freq. <11966>
Searh option <all>
Diseqc 1.0 <none>
It doesn't matter how i move the dish, the Q signal never go up. It's only blinking up and down really fast.
So i changed the setting to Galaxy 3C 95.0W and scanned, i picked up three chinese channels.
I did read from other forums and found out that
vietnamese sat used be on Intelsat 97W, but now known as Galaxy 25, and my viewsat lite don't have
G25 but only IA 97W.
I wonder if that the reason why i can't pick up any signal on 97W.?...?....
Oh one more question guys. You know the lnb have this IiIiIiIiI lines thing, on each end is a +30 and a -30, the middle is a 0. Now, on the dish arm slot that holding the lnb in also have this lines and numbers.
So my question is, does the LNB and the arm bar lines have to line up perfectly or it doesn't matter?
it's driving me nuts trying to get some VTV4.