Quote:
Originally Posted by so close
Hi everyone,
Ok, so i got me a 36" dish with single LNB point at 97.0W. Setting as follow:
Standard
10600
11966
My S signal is like 80%, but i don't understand why i got nothing out of the Q signal. It keep blinking from 0-25% really fast. Doesn't what i changes in the receiver.
I changed my receiver setting to Galaxy @ 95.0 W, I scanned and pick up like 3 Tawain channels.
See, it only 2 degrees far apart but i cannot pick up the 97.0 W.
So what do i need to do to get VTV guys...can anyone give me some more advices??? Thanks in advance
|
? You didn't say what lnbf you have. If it is indeed a "standard", then Darkman is right about the 10750, but it might be a universal, in which case you need 9750 and 10600 . Normally it will give the LO freq on the lnbf.
Also, you don't say if you have a motor or fixed dish. It does sound like you are aimed at 95, but I thought there was a chance that you might have a fixed dish and were trying to get both 95 and 97 without moving the dish or something.... probably not, but just checking.