|
One other possibility. Your software should have DiseqC1.2 commands that disable LIMITS. Some times the limits get set wrong and the motor won't move. If you disable the limits, then manually move the dish to the proper place for the limits, and re-set the limits, this usually solves the problem. If your software doesn't have the Disable Limits command, the TSREADER does, but most software that do DiseqC1.2 will have this command.
Another possibility, if you are trying to use USALS, is that you've accidently used East instead of West where it asks you for your longitude or the sat's longitude.
__________________
Bill in Maine
Sadoun has censored my signature for no good reason, which is annoying. 
|