Quote:
Originally Posted by 123
The motorized one is a Invacom Circular/Linear Ku 0.3 dB Quad LNBF QPH-031.
The rest are Dual LNBF Circular type. (I also have 1 Standard LNBF linear Single Ku 0.4dB. That is not on any dish).
I just wanna get whatever I can with the current stuff that I have. (Kinda low with $$$ now... lol)
Please let me know what I can do. Thanks for helping me out on this :-) |
There is very little and I mean very little FTA circular out there. Best to scrap the circular lnbf's for FTA usage. So realistically you only have two lnbf's not 4. The single output linear is not of any use (in a multi receiver setup) so that takes us down to the invacom. As Bill has attempted to point out you now have the issue of polarity which the Invacom can handle BUT you are trying to run the motor from 2 receivers. Not a good plan. Best to designate one receiver as master and allow it to be the only receiver that moves the motor. Now all you need is a
multiswitch installed between the motor and lnbf. I believe a 2x2 would probably do it. 2 inputs from the linear portion of the invacom to 1 motor and the other 1 receiver. Motor to receiver.