Quote:
Originally Posted by wejones
starting point for dish elevation would be a bit more than 24 deg (not 23), but dish elevation can be off considerably, and to accurately set the dish elevation, you need to peak on your due south satellite.
|
IS IT OK TO HAVE MY DEISH ELEVATION ON 20 INSTEAD OF 24???
Hey wejones once againg thanks for your advice. It's been a coiple of days since I haven't written back, since i've been trying to install this dish. And today i'm happy to say that I found my most south bird(SBS 6), but my concern is that the dish elevation I used to get SBS 6 is aprox 20 degrees, not 23 like I calculated nor 24 wejones adviced. This brings me to my first question. Will having my dish elevation set on 20 affect the dish from reciving signal from other birds? Second, when I try to scan Hispasat 30W it says that the positioner is moving, but from what I can see and hear the motor does'nt seem to move. I was trying to move from SBS6 to Hispasat. The motor DOES move fine from AMC6 to SBS6, but does not show some channel that lynsat says are to appaer. My last conern for today is the Transponders. How can I tell which transpoder is active or not? Thanks for the help and support.