View Single Post
  #13 (permalink)  
Old 05-10-2007, 08:19 AM
elgemcdlf's Avatar
elgemcdlf elgemcdlf is offline
Super Pro
Expert
 
Join Date: Dec 2005
Location: Carlisle, IN
Posts: 1,973
Rep Power: 310
elgemcdlf is a splendid one to beholdelgemcdlf is a splendid one to beholdelgemcdlf is a splendid one to beholdelgemcdlf is a splendid one to beholdelgemcdlf is a splendid one to beholdelgemcdlf is a splendid one to beholdelgemcdlf is a splendid one to behold
Send a message via MSN to elgemcdlf Send a message via Yahoo to elgemcdlf
Quote:
Originally Posted by keebs View Post
i would start over. for a newbie its going to be frustrating enough even with a plumb pole. you are better than that, why would you want inferior ****? also when you get past your mast issues another thing to not forget is how you tighten your mast clamp. do it evenly. a little each on each bolt at a time. watch your signal as you are doing it. that was one of my mistakes at first. thats my two cents.

There is nothing inferior. You take the length of the unsupported pipe in relation to the weight in relation to the D. A 2" base over a 9.5' span will show movement. Even bridges sway (suspension). Without adding wires or legs, a pipe of 2" is going to sway when checked 9' away from the base. Mine is in the 13' range with considerably more than a 1/2" movement at the top.
__________________
8.5' Mesh Dish w/ C & Ku lnb's & 24" actuator
8.5' Mesh Dish w/ BSC621-2 fixed install for circular C Band on 40.5
Fortec Star 90cm Dish w/ FSKUv lnbf & DMSISG2100
Motorola DSR922
Fortec Mercury II
Digital Stream HD1150.
Reply With Quote