[wejones]

Originally Posted by rleehamn

So instead of hooking up from the back of the 920 to a T then to MercuryII.

I would put the splitter dc on both my c and ku lines put both that pass to the 920 and the 2 non pass to my diseqC switch then from diseqC switch to my MercuryII.

Thanks

Assuming that your C and Ku lines come from the CoRotor, and you don't have additional motorized systems, then the above sounds right. What Steve is saying is that if you are trying to also control a DiseqC1.2 motor from the Mercury, then the above may not work right, because you should have the motor before the switch.