Quote:
Originally Posted by tandemrudy
So if Iam understanding this right from what Ive read threw this forum, regarding the DiSEQC 1.2 or 1.3 etc. There are some Motors that have it built in , with the possiblity of replacing the Motor in the case of a $5 switch going out on you, so would make sense to me to have that Switch separate from Motor .
So now where do I get that switch like yours the DISEQC 1.0 since you mentioned it doesn't lose as much Signal as the newer ones? Which I assume you mean the DiSEqC 1.2 or 1.3.
And is the Switch in order of Reciever> DiSEqC Switch> then Motor?
Thankyou |
you can use the disqec switches that
Sadouns sells I have 2 and they both work fine. the order would be receiver>motor>switch>LNB.
you are confusing 1.2 and 1.3 as switches these are not switches but a protocol in the receiver for moving the motor.
__________________
Rainman's Equipment
Undien 4600,DSR 922
Fortec Ultra, Satworks 3618
2 Fortec Mercury II
Fortec Classic NA
8.5' Orbitron polar C Ku dish
8.5' Birdview HH C Ku dish
100cm Fortec dish
90cm Fortec dish
2 DG-240 HH motors
Co Rotor II feed horn
Norsat 8515 C band lnb
Norsat 4506A Ku lnb
BSC-621-2 Lnbf
Invacom QPH-031 Lnbf
Invacom SNH-031 Lnbf
Fortec Fsku-v universal Lnbf
V-Box
I Like To Shop at Sadoun Satellite Sales.www.sadoun.com