Sorry to hear it does not work for you. Double check to make sure the "flash rom file" is checked, baud rate is set at 115200, most important the file is bin file. I once forgot to unzip and accidently upload the zip file to my Lifetime, luckilly, I was able to make the receiver work again by uploading the bin file.
It seems that the data was corrupted, making the receiver does not function anymore. If you feel there is nothing to loose now, try to upload the
European file (PAL) to see if it makes any differences. if the European bin can make the receiver awake, then uploading the 2.19 bin again.
Regards,
Michael
Quote:
|
Originally Posted by chick
OK. I downloaded it again to the receiver. As it was being downloaded, the numbers on the receiver counted up in sync with the software status bar. When it was complete, the receiver showed 0100, meaning 100% complete, then it went to 0001 on the receiver display. I then downloaded the update again from the FS web site and then downloaded it to the receiver....same results. 0001 on the receiver display, No picture, nothing.
|