1. No need to use a
C-band dish if you are only interested in Ku. Cubavison is also avaialbe on PAS9, KU.
2. In order to get Cubavision, you must use universal ku lnbf. Check out your lnbf to see what it is. If it is not universal, you need to relace it.
3. 2.6 is kind of small for FTA. 3ft should be a good start. If possible, get a 36"
4. Where are you located? If you live in the West, the dish elevation for PAS9 is kind of slow. Example: I live in San Francisco, Cali, the elevation for PAS9 is 11deg. PAS9 is also the furthest East sat I can get. The bottom line is you need to find a good place to install the dish to have a clear view if you live in the West.
5. It seems like your h-h mount is not set up correctly.
Sadoun has a very nice instruction of how to set up h-h mount. Please read it.
Michael
Quote:
|
Originally Posted by rafca
I want to say helo,I'm new hear.
I go to do my first mpg satellite,I have this equipment:
pansat 2300A receiver
2.6 pansat dish with Ku lnbf,0.6db
H-H motor
My question if about need some help because I only have signal from one satellite(satmex5)I have an strong signal(97%)but no signal for any other satellite.
My location:Hialeah,Florida
25.86N
80.30W
I dont know if my elevation is ok
H-H motor 65 and dish 25
My other question,I want to know how I can have signal from PAS 9,
what type of lnb I need ,I have another dish (3').
I am from Cuba and I want to see Cubavision
Any help if very appreciated.  |