View Single Post
  #42 (permalink)  
Old 02-11-2007, 09:08 PM
Corey's Avatar
Corey Corey is offline
Senior Member
Rising Star
 
Join Date: Dec 2006
Posts: 110
Rep Power: 82
Corey is on a distinguished road
Quote:
Originally Posted by WarraWarra View Post
Any help just shout.

Now comes the fun part very very slow small movements on the signal meter and then on the computer.

Bit up a bit down a bit east / west .

Best of luck , just get as strong a signal as you can and mark then try the 2 bank card / creditcard thickness part to find other sat's close by. About 2.5 to 3 deg or very close inbetween for the 2 bank card rule.
To this point, I've been using a fixed mount, but I do have a motor drive on hand, and I think it will actually help instead of complicate matters. At least I'm hoping it will.

The reason I say this is that the mounting hardware that holds the dish's azimuth, I have to keep loose in order to adjust it, and this looseness affects the elevation adjustment. It's hard to lock the elevation down because as soon as I let go of the dish it still settles down a bit because the azimuth hardware isn't tight.

With a motor, I'll be able to tighten up the azimuth hardware and lock it down, making the elevation adjustment a little easier.
Reply With Quote