What LNB Type Setting for
QPH-031?
Hello everyone, hope all is well. Weather still a little cool here in Oklahoma, but I'm sure it's colder elsewheres.
When I first got my motorize sys from
Sadoun I upgraded to the
Invacom Uni.Single
SNH-031.
Then I wanted to see about picking up circular so I order a Quad QPH-031 10.75/11.25GHz and a S-SM21H 0/22KHz (950-2150MHz)
I hooked it up just like the little instruction sheet said, then went rescan most of the birds and lost alot of chanls.
It's been several months that I let it go that way till today, I did a scan and wasn't happy, so I went out and change back to the SNH-031 did scan and had all my channels (without the S-SM21H in place) so finally after hooking it this and that way, I came to the conclusion everything outside was correct to begin with, so I hook the quad and everything back to normal went inside and after reading about 20mins here and not finding the correct answer. From what I gather and tried I started getting chanls with the quad that I wasn't before.
Question is the QPH-031 Universal?
In the menu of my MercuryII I had to change the LNB type from Univ LNB (9750,10600) to LNB-10750 and the chanls and signal showed up.
On some birds.
On another bird this setting did not work, I had to change the Lnb type to Wide LNB (9750,10750) to get the previous chanls I've scan in the past and the signal to show.
With the QPH-031 my MercuryII settings is:
LNB Type: Lnb-10750 (on some Wide Lnb(9750,10750 For example G3C 95)
Positioner: Usuals
0/22kHz: On
Switch: DiSEqC 1.0
Input: Lnb1
Legacy Switch: None
Anybody know what my settings should be?
Many thanks