LOL . You are correct. As usual anyone reading should double check my info and do more research and then form a opinion.

Sry when the power company rewired they moved the earth from the peg to the water pipes or something as it is a huge old house 1969 ?? and the earth that was here / peg is not as good as the water pipes , something to do with the soil / clay / black turf / very funny soil or that was the excuse.
Something to do with the movement / drying and cracking = loose peg in hole etc.

This is likely where my water pipe infatuation is comming from LOL.

Either way they tested it and found it to be good / working / specs / code.

Wejones if you could maybe advise me =

If getting the rg6 coax with earth/ground on the side " PERFECT-10 PVRG6DUALGD - Dual RG6 Coax Cable with Ground " or even the single with earth , is the earth on the side for mostly lightning or what is the real purpose ?? surely the braid ? will carry most of the grounding. ???
Going to roof mount 2 90cm 1 motor+lnb, 1 lnb only. North the trees are higher by 8+ feet at a distance of 15 feet away from install.

Also on the RG6 F-connector's is it necesary to go compression or normal crimp or screw on f-connector what is better as the only parts close to any form of weather will be at the 2 dishes possibly 4 connetors ??