Here's what I did for the initial setup with the
sg2100. I set the motor elevation angle to 47deg which is my lat (42.6) plus 4 deg as per page seven. Then I set the declination angle at 30deg-6.6deg=23.4 degrees for a dish bracket angle. Nimiq2 at 82.0 W gives me an azimuth of -0.6 according to
cPanelŽ and that where my strongest signal should be. I can re-set the motor but upon doing so I wonder if I have to re-set the recievers software as well or will gaaps automatically adjust? Nobody around here as ever heard of FTA or I'd hire an
installer in a minute..lol