[rainman]

Originally Posted by peachynan

Setup: 31" dish with digipower SG2100 motor, 4x1 coolsat diseq between the Invacom QPH031 LNBF and the motor. Coolsat6000 reciever. I've taken a portable TV and reciever on the roof and moved the dish east & west and up and down in small increments...still nothing in terms of signal strength. The dish moves nicely and I've done a re-set followed by an attempted re-set to the South. I'm at 42.63N x 82.56W Two questions 1. Is there really a signal at my true South which is 187 deg magnetic as the instructions say? 2. There is room to move the LNBF either closer or further away from the dish within its bracket...is this critical and should it be all the way in or out? TIA

your true south sat is the same as you longitude or the closest one to it.so your true south sat should be nimiq 2 at 82 degrees west.lnbf should be far away from dish.