Quote:
Originally Posted by wejones
Are you doing a power scan of the satellite {if so, does Montanna come up with correct frequency?) or are you doing a TP Scan?
|
Yes, a Power Scan and low by 1MHz on Montana
PBS, 14144.
Quote:
Originally Posted by wejones
I'm betting that you're set up as universal 9750/10600 when you have standard. I'd check your LO setting, then manually enter the freq/sr data for that transponder, and do a TP scan. Sometimes the Fortec power scans will miss transponders, particularly if you are in the mode that does both narrow and wide in the same scan.
|
I was, and am, set at 10750. Manually entering the frequency and symbol rate followed by a TP scan brought up the PBS channels. Thank you. I go through to see what else the power scan
Audio as mentioned, is a separate issue and these additional channels helps justify the upgrade to something with an
AC3 decoder.