Quote:
Originally Posted by bobkat
VTV4 is on IA5 at 97 degrees and SBTN is on G3C at 95 degrees. He will need two separate coax cables from the dish - so scrap the DiSEqC switch. His DTV receiver will not control a motor - so scrap the M1 system. His best bet is to put up a 90 cm dish (stationary) with a linear LNB and point it at IA5 (97); then get a circular LNB and tie-wrap to to the linear LNB to pull in DTV on G3C. This is assuming that all he wants from Directv is SBTN.
kat |
but the pansat will move a motor kat.and he stated he had one for the vtv 4 channel.I agree he doesn't need the disqec switch.and with the invacom he can get circular and linear signals but yes he would need to run 2 cables. 
__________________
Rainman's Equipment
Undien 4600,DSR 922
Fortec Ultra, Satworks 3618
2 Fortec Mercury II
Fortec Classic NA
8.5' Orbitron polar C Ku dish
8.5' Birdview HH C Ku dish
100cm Fortec dish
90cm Fortec dish
2 DG-240 HH motors
Co Rotor II feed horn
Norsat 8515 C band lnb
Norsat 4506A Ku lnb
BSC-621-2 Lnbf
Invacom QPH-031 Lnbf
Invacom SNH-031 Lnbf
Fortec Fsku-v universal Lnbf
V-Box
I Like To Shop at Sadoun Satellite Sales.www.sadoun.com
|