Quote:
Originally Posted by rainman
go with the M1 system sold by Sadoun and add a invacom qph-031 lnbf should be able to receive it with no problems.  also you will need a disqec switch. |
VTV4 is on
IA5 at 97 degrees and SBTN is on G3C at 95 degrees. He will need two separate coax cables from the dish - so scrap the
DiSEqC switch. His
DTV receiver will not control a motor - so scrap the M1 system. His best bet is to put up a 90 cm dish (stationary) with a linear LNB and point it at IA5 (97); then get a circular LNB and tie-wrap to to the linear LNB to pull in DTV on G3C. This is assuming that all he wants from Directv is SBTN.
kat