Hi Quang:
Here is the procedure for the BEC 6600 + series to stop the picture from rolling (ie: set it back to NTSC mode rather than PAL - factory default sets it to PAL -- its a
European thing... :roll: )
Using the
remote control do the following:
1) press MENU (looks like a little book icon - just below "Arrow Left" key)
2) press "Arrow Down" 5 times
3) press "OK" (key in the middle of the arrow keys)
4) press "Arrow Down" key 8 times
5) press "Arrow Right" key until picture is stable - TV Type is now set to NTSC
-- if this doesn't work, repeat the above procedure but press "Arrow Down" key 7 times rather than 8 times in step (4)
kat